TM-051 PN 35903 EC Series Models 38105, 38100, 38110
Rev 04/16/08 11
3. Locate the power supply and reflector housing so that there is free air circulation around sides. Reflector may be
mounted to a DYMAX’s flood lamp accessories such as mounting stand, lightshield, or shutter. See connecting
instruction in operation manual for appropriate DYMAX accessories.
WARNING! ALWAYS OBSERVE SAFETY REQUIREMENTS WHEN WORKING WITH ELECTRICAL EQUIPMENT!
ELECTRICAL HAZARD IS PRESENT!
4. After the bulb is inserted and reflector-housing assembly is placed and secured in the designated operation location,
proceed with interconnection as follows. Cables and receptacles are coded with color dots to assist in the installation
of cables. Connections may vary if using a DYMAX’s flood lamp accessories such as a mounting stand, lightshield, or
shutter. See connecting instruction in operation manual for appropriate DYMAX accessories.
- Connect the large connector cable to the J3 receptacle on the reflector housing. Coded red.
- Connect the other end of the cable to the lamp power receptacle on rear panel of the power supply. Coded
red.
- Make sure that the other DYMAX accessories, if any is also properly connected and operational.
- Plug the AC cord into the power module located in the rear panel of the power supply, and plug the other end
of the cord into appropriate external AC source.
Components Description
2000 EC:
The Dymax 2000 EC is a general purpose UV light source with an effective curing area of approximately 8" x 8",
making it ideal for batch processing or curing large areas.
An optional special glass UV filter may be installed in the 2000 EC reflector to reduce UV-B and UV-C spectral
emissions. When operated correctly using the glass filter, extensive shielding associated with many lamps can be
minimized.
The 2000 EC employs convection cooling. An optional fan ventilation kit is also available. This kit removes
excessive heat due to the lamp’s possible proximity to other heat sources, or to remove vapors from under the
lamp/reflector assembly housing during curing of UV materials. (Please refer to the SPARE PARTS/OPTIONS
section of this manual for more information on the Fan Ventilation Kit.)
5000 EC:
The Dymax 5000 EC is a general purpose UV light source with an effective curing area of approximately 5" x 5".
The unit is ideal for small batch processing of UV adhesives and potting compounds.
Comparatively, it provides more than twice the output intensity of a Dymax 2000 EC light source for faster curing
capability and the additional ability to cure conformal coating resins.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(16 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji